We can laser cut/engrave plastics, woods, rubbers, papers, and engrave metals (painted) as long as they do not contain vinyl. Depending on the material, there is usually no limit to the thinnest sheet we can cut, and the thickest sheet we can cut is typically 1/4". We stock some woods and various plastics including acrylic.
*First Place, LLC does not sell alcohol and is not affiliated with Jack Daniels or any of its affiliates. Image is for informational purposes only. Bottles must be provided.
Materials we can laser cut/engraveWe do not cut/engrave any outside plastic material. Some materials produce a toxic gas and/or melt and even catch fire. Some plastics from China may be mislabeled and are not worth the risk of engraving.
Plastics:Only plastic material we supply will be engraved.
Acrylic (also known as Plexiglas, Lucite, PMMA)
Two-tone plastic – top color different than core material, usually for custom instrumentation panels, signs, and plaques.
Glass:We can laser etch glass but cannot cut.
Metals:If painted or anodized we can usually laser engrave any metal. We cannot cut any metal with the laser.
Woods (MDF, balsa, birch, poplar, red oak, cherry, holly, etc.) :We will test run a piece of wood for you to see if it has desired effect at no charge.
Materials we cannot laser cut/engraveWe cannot cut metals. We can laser engrave if painted.
Polycarbonate (PC, Lexan)
Vinyl (and any materials that containing vinyl)
PVC (Cintra) – contains vinyl
Glass – we can engrave glass, but we cannot cut it.
Printed circuit board (FR4 and other material types) Carbon fiber
If you have specific questions about engravable materials please let us know.
|©2019 First Place, LLC. All Rights Reserved.|